|
DCP_0017
11/03/2011 Shotgun cleaning brush on the oil gallery - plugs
Date: 11/03/2011
Views: 1708
|
DCP_0018
Cleaning the cylinder bores - wipe down with clean engine oil
Date: 11/03/2011
Views: 1598
|
DCP_0019
Cylinder bores with oil
Date: 11/03/2011
Views: 1608
|
|
DCP_0021
Wipe out with clean towel
Date: 11/03/2011
Views: 1643
|
DCP_0022
Re-apply oil, re-wipe, until the towel comes out clean. IH says 3 times is a good start.
Date: 11/03/2011
Views: 1624
|
DCP_0023
Re-apply oil, re-wipe, until the towel comes out clean. IH says 3 times is a good start.
Date: 11/03/2011
Views: 1540
|
|
DCP_0024
Checking ring gap - push ring down into the cylinder (the very top is chamfered and is not a good test) - use a corner/square to ensure the ring is the same distance down in the hole at all sides.
Date: 11/03/2011
Views: 1570
|
DCP_0025
Checking ring gap - push ring down into the cylinder (the very top is chamfered and is not a good test) - use a corner/square to ensure the ring is the same distance down in the hole at all sides.
Date: 11/03/2011
Views: 1649
|
DCP_0026
Checking ring gap - push ring down into the cylinder (the very top is chamfered and is not a good test) - use a corner/square to ensure the ring is the same distance down in the hole at all sides.
Date: 11/03/2011
Views: 1633
|
