|
12x12 sheet of steel in the press brake, bending a 3.5" or so lip
Date: 02/21/2015
Views: 1519
|
After a trip through the press brake - I would eventually press it again for a better 90
Date: 02/21/2015
Views: 1410
|
After the press brake
Date: 02/21/2015
Views: 1396
|
|
Mock fitment
Date: 02/21/2015
Views: 1347
|
Mock fit, lowered to show more clearly
Date: 02/21/2015
Views: 1400
|
Second bend in the plate to "wrap around" the inner quarter panel
Date: 02/21/2015
Views: 1454
|
|
After trimming and the start of welding
Date: 02/21/2015
Views: 1389
|
After welding the inside too
Date: 02/21/2015
Views: 1395
|
Paint
Date: 02/21/2015
Views: 1287
|
