|
Steel storage system - slotted track and shelf brackets from Home Depot
Steel storage system - slotted track and shelf brackets from Home Depot
Date: 12/31/1969
Views: 762201
|
Steel storage system - slotted track and shelf brackets from Home Depot
Steel storage system - slotted track and shelf brackets from Home Depot
Date: 12/31/1969
Views: 30471
|
Bender mounted to 2x2 square tube and mounted up in the shop cart
Bender mounted to 2x2 square tube and mounted up in the shop cart
Date: 12/31/1969
Views: 2591
|
10T porta-power with various fittings affixed to the factory supplied hydraulic adapters from JD2
10T porta-power with various fittings affixed to the factory supplied hydraulic adapters from JD2
Date: 12/31/1969
Views: 15301
|
10T porta-power with various fittings affixed to the factory supplied hydraulic adapters from JD2
10T porta-power with various fittings affixed to the factory supplied hydraulic adapters from JD2
Date: 12/31/1969
Views: 3515
|
|
Ready to bend
Ready to bend
Date: 12/31/1969
Views: 40320
|
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each t
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each time.
Date: 12/31/1969
Views: 5074
|
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each t
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each time.
Date: 12/31/1969
Views: 2596
|
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each t
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each time.
Date: 12/31/1969
Views: 2004
|
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each t
Out of stroke. Retract, reset. This involves an extension, and to get the extension in place, I had to unthread the ram each time.
Date: 12/31/1969
Views: 2961
|
|
My first bend! 2x.095 tubing. Just shy of 90deg
My first bend! 2x.095 tubing. Just shy of 90deg
Date: 12/31/1969
Views: 2570
|
Just shy of 90deg
Just shy of 90deg
Date: 12/31/1969
Views: 3408
|
dcp_0001.jpg
dcp_0001.jpg
Date: 12/31/1969
Views: 990
|
dcp_0002.jpg
dcp_0002.jpg
Date: 12/31/1969
Views: 1156
|
dcp_0003.jpg
dcp_0003.jpg
Date: 12/31/1969
Views: 9238
|
