|
After clean-up with the pressure washer. 5/2/2004
After clean-up with the pressure washer. 5/2/2004
Date: 12/31/1969
Views: 3227
|
You can see that the parking brake hardware (top) mounts using the 5/8 bolts, but is NOT part of the output shaft bearing retain
You can see that the parking brake hardware (top) mounts using the 5/8 bolts, but is NOT part of the output shaft bearing retainer
Date: 12/31/1969
Views: 1571
|
Muncie PTO PT-3DWN
Muncie PTO PT-3DWN
Date: 12/31/1969
Views: 3540
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 3710
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 4244
|
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 2524
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 4792
|
Comparison
Comparison
Date: 12/31/1969
Views: 2263
|
Found this hunk of 6" wide 1/4" plate lying in my steel pile.
Found this hunk of 6" wide 1/4" plate lying in my steel pile.
Date: 12/31/1969
Views: 2023
|
DCP_0022.JPG
DCP_0022.JPG
Date: 12/31/1969
Views: 1378
|
|
Bought a 3.5" hole-saw to make the hole for the "bubble" of the cover I'm going around.
Bought a 3.5" hole-saw to make the hole for the "bubble" of the cover I'm going around.
Date: 12/31/1969
Views: 1557
|
Another look at the template
Another look at the template
Date: 12/31/1969
Views: 4245
|
Hinges, and the crossmembers that are waiting for paint.
Hinges, and the crossmembers that are waiting for paint.
Date: 12/31/1969
Views: 4386
|
After making one and a half cuts through the plate to notch the top, the 18V Dewalt Sawzall quit, and I left the corded Milwauke
After making one and a half cuts through the plate to notch the top, the 18V Dewalt Sawzall quit, and I left the corded Milwaukee at home. I only had to use the sawzall because I broke the bandsaw blade earlier this day
Date: 12/31/1969
Views: 4704
|
dcp_0001.jpg
dcp_0001.jpg
Date: 12/31/1969
Views: 70614
|
|
dcp_0002.jpg
dcp_0002.jpg
Date: 12/31/1969
Views: 1971
|
dcp_0003.jpg
dcp_0003.jpg
Date: 12/31/1969
Views: 2386
|
dcp_0004.jpg
dcp_0004.jpg
Date: 12/31/1969
Views: 6783
|
dcp_0005.jpg
dcp_0005.jpg
Date: 12/31/1969
Views: 1449
|
dcp_0006.jpg
dcp_0006.jpg
Date: 12/31/1969
Views: 1341
|
|
dcp_0007.jpg
dcp_0007.jpg
Date: 12/31/1969
Views: 1416
|
dcp_0008.jpg
dcp_0008.jpg
Date: 12/31/1969
Views: 1193
|
dcp_0009.jpg
dcp_0009.jpg
Date: 12/31/1969
Views: 1155
|
dcp_0010.jpg
dcp_0010.jpg
Date: 12/31/1969
Views: 1141
|
dcp_0011.jpg
dcp_0011.jpg
Date: 12/31/1969
Views: 1236
|
