|
After clean-up with the pressure washer. 5/2/2004
After clean-up with the pressure washer. 5/2/2004
Date: 12/31/1969
Views: 3708
|
You can see that the parking brake hardware (top) mounts using the 5/8 bolts, but is NOT part of the output shaft bearing retain
You can see that the parking brake hardware (top) mounts using the 5/8 bolts, but is NOT part of the output shaft bearing retainer
Date: 12/31/1969
Views: 1876
|
Muncie PTO PT-3DWN
Muncie PTO PT-3DWN
Date: 12/31/1969
Views: 3775
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 4040
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 4494
|
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 2794
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 5096
|
Comparison
Comparison
Date: 12/31/1969
Views: 2422
|
Found this hunk of 6" wide 1/4" plate lying in my steel pile.
Found this hunk of 6" wide 1/4" plate lying in my steel pile.
Date: 12/31/1969
Views: 2185
|
DCP_0022.JPG
DCP_0022.JPG
Date: 12/31/1969
Views: 1524
|
|
Bought a 3.5" hole-saw to make the hole for the "bubble" of the cover I'm going around.
Bought a 3.5" hole-saw to make the hole for the "bubble" of the cover I'm going around.
Date: 12/31/1969
Views: 1652
|
Another look at the template
Another look at the template
Date: 12/31/1969
Views: 4330
|
Hinges, and the crossmembers that are waiting for paint.
Hinges, and the crossmembers that are waiting for paint.
Date: 12/31/1969
Views: 4466
|
After making one and a half cuts through the plate to notch the top, the 18V Dewalt Sawzall quit, and I left the corded Milwauke
After making one and a half cuts through the plate to notch the top, the 18V Dewalt Sawzall quit, and I left the corded Milwaukee at home. I only had to use the sawzall because I broke the bandsaw blade earlier this day
Date: 12/31/1969
Views: 4787
|
dcp_0001.jpg
dcp_0001.jpg
Date: 12/31/1969
Views: 70722
|
|
dcp_0002.jpg
dcp_0002.jpg
Date: 12/31/1969
Views: 2041
|
dcp_0003.jpg
dcp_0003.jpg
Date: 12/31/1969
Views: 2486
|
dcp_0004.jpg
dcp_0004.jpg
Date: 12/31/1969
Views: 6865
|
dcp_0005.jpg
dcp_0005.jpg
Date: 12/31/1969
Views: 1549
|
dcp_0006.jpg
dcp_0006.jpg
Date: 12/31/1969
Views: 1428
|
|
dcp_0007.jpg
dcp_0007.jpg
Date: 12/31/1969
Views: 1500
|
dcp_0008.jpg
dcp_0008.jpg
Date: 12/31/1969
Views: 1305
|
dcp_0009.jpg
dcp_0009.jpg
Date: 12/31/1969
Views: 1246
|
dcp_0010.jpg
dcp_0010.jpg
Date: 12/31/1969
Views: 1239
|
dcp_0011.jpg
dcp_0011.jpg
Date: 12/31/1969
Views: 1319
|