Login
Gallery 1974 Travelette IH 5spd Building the 74/75 transmission mount
Advanced Search
View Slideshow View Slideshow (Fullscreen)

IH 5spd

1. MTD 16.5hp ... ... 14. Mark... 15. Mark... 16. Mark... 17. Mark... 18. Mark... 19. Mark... 20. Building...

Building the 74/75 transmission mount

Date: 05/03/2004
Size: 94 items
first previous
"Raised" shifter boot area - far from perfection, but functional

"Raised" shifter boot area - far from perfection, but functional

"Raised" shifter boot area - far from perfection, but functional

Date: 12/31/1969
Views: 5351
Shifter was notched in one place with a grinder until I cut enough and got it hot enough to finish bending, then re-welded. This

Shifter was notched in one place with a grinder until I cut enough and got it hot enough to finish bending, then re-welded. This

Shifter was notched in one place with a grinder until I cut enough and got it hot enough to finish bending, then re-welded. This is in 1st gear

Date: 12/31/1969
Views: 1875
Reverse

Reverse

Reverse

Date: 12/31/1969
Views: 7537
2nd gear

2nd gear

2nd gear

Date: 12/31/1969
Views: 907
5th gear

5th gear

5th gear

Date: 12/31/1969
Views: 857
Clearance hole for the slave cylinder is still unfinished

Clearance hole for the slave cylinder is still unfinished

Clearance hole for the slave cylinder is still unfinished

Date: 12/31/1969
Views: 1505
Looking forward after lowering the transmission mount

Looking forward after lowering the transmission mount

Looking forward after lowering the transmission mount

Date: 12/31/1969
Views: 1226
PTO clearance

PTO clearance

PTO clearance

Date: 12/31/1969
Views: 1482
More PTO clearance

More PTO clearance

More PTO clearance

Date: 12/31/1969
Views: 1610
Driveshaft to floor clearance

Driveshaft to floor clearance

Driveshaft to floor clearance

Date: 12/31/1969
Views: 858
Driveshaft to floor clearance - note the rub mark on the driveshaft from just 10 miles.

Driveshaft to floor clearance - note the rub mark on the driveshaft from just 10 miles.

Driveshaft to floor clearance - note the rub mark on the driveshaft from just 10 miles.

Date: 12/31/1969
Views: 922
DCarrier bearing view

DCarrier bearing view

DCarrier bearing view

Date: 12/31/1969
Views: 836
DCP_0007.JPG

DCP_0007.JPG

DCP_0007.JPG

Date: 12/31/1969
Views: 1153
Rear dump headers, driver's side

Rear dump headers, driver's side

Rear dump headers, driver's side

Date: 12/31/1969
Views: 897
IFS front suspension, looking forward from under the truck

IFS front suspension, looking forward from under the truck

IFS front suspension, looking forward from under the truck

Date: 12/31/1969
Views: 1948
Looking to the rear, starting at approximately the carrier bearing crossmember.  Passenger muffler cut off and mid-replacement

Looking to the rear, starting at approximately the carrier bearing crossmember. Passenger muffler cut off and mid-replacement

Looking to the rear, starting at approximately the carrier bearing crossmember. Passenger muffler cut off and mid-replacement

Date: 12/31/1969
Views: 1123
Starter, with starter wire re-routed UNDER the frame and outboard

Starter, with starter wire re-routed UNDER the frame and outboard

Starter, with starter wire re-routed UNDER the frame and outboard

Date: 12/31/1969
Views: 1676
Another look at the header

Another look at the header

Another look at the header

Date: 12/31/1969
Views: 1869
2012-09-26_19-55-15_181.jpg

2012-09-26_19-55-15_181.jpg

Date: 09/26/2012
Views: 1811
 
first previous
Page: 1 2 3 4
Advanced Search
Powered by Gallery v2.3